Download Links for the Eclips3D2 V2.1
Click the links below to download whatever you need for the Eclips3D. Please do not re-upload without my permission. If you think you've found any errors in these files, please let me know in the appropriate section of the forums!
|
|
| ||||||
Looking to order the machined parts for the Eclips3D2 from a professional machine shop? Check out Parts-Badger and let them know I sent you!
These annoying ads above help to support my work and keep my printers open sourced. But don't feel bad if you use an ad blocker plugin, I do too :)
2.1 Change Log
-Redesigned X Carriage to utilize slot for easier hotend mounting
-Redesigned hotend clamp to more securely fasten hotend
-Redesigned Fan Bracket to utilize new fan mounting positions, as well as to now support dual cooling fans
-Redesigned Y Axis Endstop Bracket to avoid interference with new Fan Bracket
-Improve power switch and socket mounting bracket
-Added more and larger holes in back acrylic panel to allow easier cable management
-Standardized parts to use all hex nuts, some used square nuts previously
-Updated Firmware
-Cost reduction (No change of product types, just different sources)
-(8/3/17) Updated firmware - increased Z height to 260mm
-(8/3/17) Updated firmware - added custom LCD command to set Z offset based on current position
-(8/3/17) Updated firmware - now using PID with heated bed by default
-(8/3/17) Updated BOM - Added 2 new parts (D21 & D22)
-(8/3/17) Updated BOM - Old part D21 (M5 T-Nuts) part number changed to D23
-(8/3/17) HIGHLY recommended to print and use a ptfe adapter clip similar to this for use on hotend and extruder
-(8/8/17) Updated firmware - added scripts folder with load and unload filament scripts. These are still executed with the same LCD
options in the custom menu
-(8/27/17) Updated BOM - Updated some descriptions to make ordering products easier
-Redesigned X Carriage to utilize slot for easier hotend mounting
-Redesigned hotend clamp to more securely fasten hotend
-Redesigned Fan Bracket to utilize new fan mounting positions, as well as to now support dual cooling fans
-Redesigned Y Axis Endstop Bracket to avoid interference with new Fan Bracket
-Improve power switch and socket mounting bracket
-Added more and larger holes in back acrylic panel to allow easier cable management
-Standardized parts to use all hex nuts, some used square nuts previously
-Updated Firmware
-Cost reduction (No change of product types, just different sources)
-(8/3/17) Updated firmware - increased Z height to 260mm
-(8/3/17) Updated firmware - added custom LCD command to set Z offset based on current position
-(8/3/17) Updated firmware - now using PID with heated bed by default
-(8/3/17) Updated BOM - Added 2 new parts (D21 & D22)
-(8/3/17) Updated BOM - Old part D21 (M5 T-Nuts) part number changed to D23
-(8/3/17) HIGHLY recommended to print and use a ptfe adapter clip similar to this for use on hotend and extruder
-(8/8/17) Updated firmware - added scripts folder with load and unload filament scripts. These are still executed with the same LCD
options in the custom menu
-(8/27/17) Updated BOM - Updated some descriptions to make ordering products easier
The Eclips3D is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License
