Download Links for the Eclips3D V1.1
Click the links below to download whatever you need for the Eclips3D. Please do not re-upload without my permission. If you think you've found any errors in these files, please let me know in the appropriate section of the forums!
|
|
|
|
These annoying ads above help to support my work and keep my printers open sourced. But don't feel bad if you use an ad blocker plugin, I do too :)
1.1 Change Log
New Parts
A30 - Belt Clamp Mate - Part of new belt clamps (A2 + A3)
A31 - Azteeg Bracket - Allows for easy mounting of azteeg x5 mini control board
Part Changes
A1 - Made nut slot on back stronger. Reinforced blower fan mounting point. Fixed endstop mount.
A2 + A3 - Redone to have stronger hold on belt, more durable
A16 + A17 - Added more material around rod to prevent cracking
A19 - Changed height of trigger to optimize rigidity and z axis travel.
B5 - Opened up linear bearing holes by 0.1mm to make bearing installation easier.
A8 - (2/8/16) Corrected distance between mounting groove and screw hole for better fit
Assembly Changes
-Updated assembly with new parts
-Modified some textures to be more realistic
Misc Changes
-Added part number for m3x30 hex head bolt from McMaster-Carr
-Revised part numbers for products from RobotDigg
-Edited config file to change max axis speed to 18000 (300mm/s) and max motor speed to 21000 (350mm/s)
-Lowered config z axis speed to 4800 (80mm/s)
-Lowered config acceleration to 2500 and jerk to 0.025
-Included "exparimental" parts section which has INCOMPLETE panels and some other untested parts. Use with caution!
-(1/1/16) Fixed error in BOM, corrected part D3 from 3x to 7x
-(3/1/16) Added section in BOM for part substitutions to save $$$ during the build. None of these changes are recommended,
but I'm putting them out there for those on a budget who would otherwise not be able to build the Eclips3D!
-(3/30/16) Modified config file in firmware bundle to have Semitec thermistor selected by default (previously used beta value of
3950 instead which is incorrect for e3d v6 hot ends).
-(3/30/16) Updated slic3r config files
New Parts
A30 - Belt Clamp Mate - Part of new belt clamps (A2 + A3)
A31 - Azteeg Bracket - Allows for easy mounting of azteeg x5 mini control board
Part Changes
A1 - Made nut slot on back stronger. Reinforced blower fan mounting point. Fixed endstop mount.
A2 + A3 - Redone to have stronger hold on belt, more durable
A16 + A17 - Added more material around rod to prevent cracking
A19 - Changed height of trigger to optimize rigidity and z axis travel.
B5 - Opened up linear bearing holes by 0.1mm to make bearing installation easier.
A8 - (2/8/16) Corrected distance between mounting groove and screw hole for better fit
Assembly Changes
-Updated assembly with new parts
-Modified some textures to be more realistic
Misc Changes
-Added part number for m3x30 hex head bolt from McMaster-Carr
-Revised part numbers for products from RobotDigg
-Edited config file to change max axis speed to 18000 (300mm/s) and max motor speed to 21000 (350mm/s)
-Lowered config z axis speed to 4800 (80mm/s)
-Lowered config acceleration to 2500 and jerk to 0.025
-Included "exparimental" parts section which has INCOMPLETE panels and some other untested parts. Use with caution!
-(1/1/16) Fixed error in BOM, corrected part D3 from 3x to 7x
-(3/1/16) Added section in BOM for part substitutions to save $$$ during the build. None of these changes are recommended,
but I'm putting them out there for those on a budget who would otherwise not be able to build the Eclips3D!
-(3/30/16) Modified config file in firmware bundle to have Semitec thermistor selected by default (previously used beta value of
3950 instead which is incorrect for e3d v6 hot ends).
-(3/30/16) Updated slic3r config files
The Eclips3D is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License